The Level Control module gives students hands-on experience with the measurement and control of liquid level using open loop, on/off loop and three-element (PID) control methods.

The Level Control training system serves to demonstrate and teach the measurement and control of level. The system gives students a solid understanding of the fundamentals of instrumentation and industrial process control. 

Students use ProcessMotion simulation control software to practice the measurement and control of level processes using open loop, on/off loop and three-element (PID) control methods. Students raise and lower water to preset levels using manual control and auto-tuning methods. They learn how flow rate affects a preset level. Students create variable demand and supply disturbances by manipulating the panel's loading pump. Students learn to optimize the parameters for PID control of level and flow and to verify controller tuning.

Cat. Number 77-3045-0002
[Ver: 2.1.2.0]

The Temperature Process Control module enables students to study and practice the control of temperature processes using open loop, on/off loop and three-element (PID) control methods. The Temperature Process Control training system serves to demonstrate and teach the measurement and control of heat exchanger and heated tank processes. The system gives students a solid understanding of the fundamentals of instrumentation and industrial process control. 

Students use ProcessMotion simulation and control software to control the virtual Process Control training panel and practice the measurement and control of two temperature processes using open loop, on/off loop and three-element (PID) control methods. Students raise and lower water temperature to preset levels using manual control and auto-tuning methods. They control the flow rate through the heat exchanger using a motorized valve, and create variable demand and supply disturbances by introducing cooled water from the reservoir tank. Students learn to optimize the parameters for PID control of temperature and to verify controller tuning.

[Ver: 2.0.0.0]

The Pressure Process Control module offers students hands-on training in the measurement and control of pressure processes using open loop, on/off loop and three-element (PID) control methods.

The Pressure Process Control training system serves to demonstrate and teach the measurement and control of pressure processes. The system gives students a solid understanding of the fundamentals of instrumentation and industrial process control. 

The modules uses ProcessMotion simulation control software to control a virtual training panel for the practice the measurement and control of pressure processes using open loop, on/off loop and three-element (PID) control methods. Students raise and lower air pressure to preset levels using manual control and auto-tuning methods. Students learn how the E/P converter with the control valve affects a preset pressure in the air tank. They create variable demand and supply disturbances by manipulating the panel's valves. Students learn to optimize the parameters for PID control of pressure and to verify controller tuning.

Cat. Number 77-3044-0002
[Ver: 2.0.1.0]

The Flow Process Control module gives students hands-on experience with the measurement and control of liquid flow rates using open loop, on/off loop and three-element (PID) control methods.

The Flow Process Control training system serves to demonstrate and teach the measurement and control of flow processes. The system gives students a solid understanding of the fundamentals of instrumentation and industrial process control. 

Using advanced 3D-modeling simulation control software, students practice the measurement and control of flow processes using open loop, on/off loop and three-element (PID) control methods. Students raise and lower water flow rates to preset levels using manual control and auto-tuning methods. Students create variable demand and supply disturbances by opening an outlet valve along the supply pipe. Students learn to optimize the parameters for PID control of flow and to verify controller tuning.

Cat. Number: 77-3043-0002
[Ver: 2.0.2.1]

Refining, combining, handling, and processing fluids is demanding, and potentially hazardous. Minor changes in a process can have a large impact on the end result. Variations in proportions, temperature, flow, turbulence, and many other factors must be carefully and consistently controlled to produce the desired product with a minimum of raw materials and energy. Process control technology is the tool that enables manufacturers to keep their operations running within specified limits and to set more precise limits to maximize profitability, ensure quality and plant safety.

77-8073-0005
v1.0.0.2

The Main Platform Unit Refrigeration Training Systems are designed to provide students with fundamentals and an advance training program in basic and professional refrigeration. Students are introduced to and master the various arrangements and real components of refrigeration.

[Cat. #: 77-8301-0001]

[v 1.0.0.0]

This course describes and uses the Main Platform Unit and the Professional Air-Conditioning System for the basic Air-conditioning experiments.

[Cat. #: 77-8301-0002]

[v 1.0.0.0]